[argyllcms] Re: Strip read failed due to communication problem (i1pro W7x64)
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 17 Jul 2011 11:22:17 +1000
M. Kupiec wrote:
> New 4$ usb PCI card solved my problem with i1pro without need of any
> software modification
> As i suspect USB Voltage stabilizers or P67 compatibility was the problem.
Good to know you've found a solution. Without further testing it's
hard to know if it is power supply or something more subtle about
the PCI chip.
Graeme Gill.
Other related posts:
