Hi Greame I want to thank you again. I do what you told me, and it works. Only question is, does profile be good while I use targen with Ink Limit and later erase? PS. Please put in your donation Serbia instructions for paying :) Dimitrije Zivkovic On May 24, 2012, at 2:11 PM, Graeme Gill wrote: > dimitrije zivkovic wrote: >> I have problem with making RGB profile. I always get colored background, >> white is not white. I have >> the same problem on several printers. >> Command is always the same: >> "colprof -v -D"name" -qm -bh -cmt -dpp -ssRGB.icm -Oname" > > Hi, the problem is that you set an ink limit on an RGB device. You've limited > the maximum device value sum to < 3.0, so it can't reach white. Remove the > ink limit (ie. edit it out of the .ti3 file), it doesn't make any sense > for an RGB colorspace. > > Graeme Gill. >