[argyllcms] Re: Rgb profile
- From: dimitrije zivkovic <migraf015@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 24 May 2012 14:12:48 +0200
Hi
I use OS 10.6.8 for making profile. And printer is attached on winxp with
pcl 6 driver.
Dimitrije Zivkovic
Authorized dealer INEQS ceramic toner
Serbia, 15000 Sabac
Tel. +381 15 353 653
Mob. +381 64 215 50 20
On May 24, 2012 2:05 PM, "edmund ronald" <edmundronald@xxxxxxxxx> wrote:
> Dimitrije,
>
> What is the context in which you USE the profile? OS, software,
> printer driver?
>
> Edmund
>
> On Thu, May 24, 2012 at 1:20 PM, Dimitrije Zivkovic <migraf015@xxxxxxxxx>
> wrote:
> > Hi Nikolay
> >
> > No I've not misunderstood you, I just do that because of device profile,
> but
> > I also make like you tell me, and I've got same results, not exactly the
> > same, little bit better gradation, but also white is not white, this is
> the
> > point.
> > I can't unsterstand what's happend. For me realy strange.
> > Maybe it's problem with Argyll command.
> >
> > PLEASE HELP!!!
> >
> > DIMITRIJE
> > On May 24, 2012, at 9:55 AM, Nikolay Pokhilchenko wrote:
> >
> > Dimitrije, You've misunderstood me slightly. I've recommend -qu -bh, not
> -qh
> > -bu. The first have more sense than the last and is much faster.
> > Have You dithering enabled in Your workflow?
> >
> > Thu, 24 May 2012 08:33:44 +0200 от Dimitrije Zivkovic <
> migraf015@xxxxxxxxx>:
> >
> > Hi Nikoly
> > Color space from device is too different from regular one. That's why I
> have
> > to use -bh or -bu, and if I use -qh -bu the time for compute is too big,
> and
> > I've got always massage for memory low or something.
> > But that is not big problem. When I make CMYK profile, everything is ok,
> I
> > mean with Argyll, but when I make any RGB profile I've got colored
> > background. Before I use original program from X-rite (Munki) everything
> > seems ok.
> >
> > So does anyone get similar results with RGB profile?
> >
> >
> > Dimitrije Zivkovic
> >
> > On May 24, 2012, at 8:24 AM, Nikolay Pokhilchenko wrote:
> >
> > Hi Dimitrije
> > Do You have the particular reason to compute high resolution backward
> table
> > (-bh) having standard resolution of the forward table (-qm)?
> > I didn't know wither it is the problem reason or not but...
> > As I'm understanding the profile compute process, the backward table
> compute
> > is performing on the forward table compute result. So, If You have
> normal
> > resolution forward table, there is no sense to compute higher resolution
> > backward table.
> > As I've noticed, the computing of the forward table is much more faster
> than
> > the backward one. So You can try "-qh" or even "-qu -bh" without very
> much
> > computing time increase.
> >
> >
> > Thu, 24 May 2012 07:36:24 +0200 от dimitrije zivkovic <
> migraf015@xxxxxxxxx>:
> >
> > Hi everybody
> >
> > I have problem with making RGB profile. I always get colored background,
> > white is not white. I have the same problem on several printers.
> > Command is always the same:
> > "colprof -v -D"name" -qm -bh -cmt -dpp -ssRGB.icm -Oname"
> >
> > please advice
> >
> > Dimitrije Zivkovic
> >
> >
> >
> >
> >
>
>
Other related posts:
