Hello all. I am trying to do some specific tests and need to override the Ink Limit being imparted into the resulting profile. I am using -l400 in my call to txt2ti3 (converting CGATS to ti2/ti3 files) then -l400 in the call to colprof. Note these are specific in that I have no black inking going on, and I do see that the programs are taking the request to override the calculated Ink Limit (-v switch). However when I start getting to the 80%+ tone value region, the profile starts sucking out on me It pulls back on C and M and starts to push Y. In looking at where argyll wants to pin my total ink (when left alone; no -l switch) it puts me around 260%, and that is what I see in the curves coming from xicclu -- that it starts pulling back and at 100% C, M, and Y add up to just about that -- despite my attempt to push it. I understand argyll is probably modeling reality and I am assuming I'll be told I cannot create something from nothing (if total ink is found to be 260% you can't arbitrarily push it out to 300%)?! My desire would be that the curves all push out to 300% in a more 'normal' fashion versus the kooky business happening past 80%, specifically with the Y channel. Any hope for this, or 'it is what it is'?
Attachment:
icclu.png
Description: PNG image
