Dana, I haven't had time to call (long distance) so I went to the website and see lots of pictures but very little information with them! Their tubular hooping system looks great, but no where does it say it would fit the Amaya, and nothing in the one page of 'hat frames' had anything about bucket cap frames. Do you have a more specific 'page' on their website that gives information-or is the site more of a 'blind catalog' with no info? I get a lot of sites like that for screen printing supplies-just a 'web presence' to get the phone number and some info out-but no real substance. Anyone know of a US distributor for the frame systems yet? And if Jeff is reading-would use of these frames void any warranties? I do a lot of tote bags and the system shown there 'might' be an advantage since the Melco 'fast frame' is more of a joke than a help.... Roland > From: Ram Printing and Promotions Inc <ramprinting@xxxxxxx> > Reply-To: amayausers@xxxxxxxxxxxxx > Date: Wed, 20 Jul 2005 09:00:48 -0700 > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Re: hat frame > > Roland, > > Embroidery Systems Canada out of Calgary Alberta carries a great bucket cap > frame that mounts on the amaya driver. Works like a charm. Give Bruce a call > and tell him that I refered you. He will take care of you. They are much > easier than trying to use a flat hoop or a conventional cap frame > > www.embroiderysystemscanada.com > or 1.403.205.2692 > > Dana @ > Ram Printing & Promotions Inc. > (780) 875-5073 > www.ramprinting.net