Thanks for everyone's input....I will start experimenting with the suggestions. Mike Janel Harris wrote: >Mike, > >Check the fill objects for density, stitch length and underlay. Too many >stitches and too long of stitch will cause puckering. Underlay should >run the opposite direction of the top stitches to minimize the pull of >the fabric. Also check the density and underlay for the bordering >columns. If editing the design doesn't completely resolve the issue then >look at increasing material thickness. > >Janel Harris >Dimensional Designs >http://www.dimdesigns.com >DesignShop Digitizing >Melco On-Site Training > > > > > > > > >