[amayausers] Re: Error questions now
- From: <impressingpromo@xxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 15 Feb 2006 11:13:39 -0800
I did know that, but we wrote down the xy coordinates because we had to adjust
the position of the design before sewing so that it would fit correctly on the
hat. We didn't want it to be too high on the hat.
Don't worry, right now I am not going to take offense to much.
---- Body Cover <info@xxxxxxxxxxxxxxxxxxx> wrote:
> I don't know if you know this or not,
> sorry if you did I mean no offense.
> but, when you restart the machine
> and the design reloads, you don't use the move
> keys and go to the xy coordinates that you had written down at the
> time of lock up, but do write down the stitch number its at.
>
> then you go to the "Tools" drop down and choose "Move to last origin"
> and it will move to where you started the last design- NOT the
> spot where it shut down, the place where you were at when you pushed the
> start button for the first time.
>
> at that point go to the settings drop down and then the move tab
> and enter the stitch count you wrote down into the "move to stitch number"
> box, then you can back up any needed stitches and should be ready to go!
>
> Good Luck
>
> Ron Vinyard
> Body Cover / Magic Stitches
>
> 1-888-435-0176
> 541-471-1504 Fax 541-471-0427
>
> 420 SW H Street, Grants Pass, OR 97526-2532
>
> info@xxxxxxxxxxxxxxxxxxx
> www.bodycoverdesign.com
>
> ----- Original Message -----
> From: "Childs" <impressingpromo@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, February 14, 2006 10:58 PM
> Subject: [amayausers] Error questions now
>
>
> > Hello All,
> > Since loading the new updates last week, we have started getting some new
> > error messages from our unhappy red head. The common
> > one that is oh so wanting to leave a knot on her head is: "cluster
> > invalid, master machine detached from system" This has
> > happend about 4 or 5 times in the past couple of nights. The only thing it
> > will respond to at this point is to power down. Twice
> > we have lost the hat because when we move it back to the position
> > cordinates, the regestration is way off. Any suggestions to
> > what we might be doing wrong? Regestration is really giving us fitts too,
> > which is a new problem. We also are still having no
> > luck with the auto feed.
> >
> > We work this stuff in the evenings right now, so please don't get
> > discouraged if you don't see us reply right away, all of your
> > help and suggestions are greatly appreciated.
> >
> > Thank you,
> > Jimbo & Tara Childs
> > Impressing Promotions, LLC
> > 2575 Campus Dr., Ste. 341
> > Klamath Falls, OR 97601
> > Cell: 541-891-5748
> > Fax: 541-273-5798
> >
> >
> >
>
>
Other related posts:
