[amayausers] Re: Error questions now
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 15 Feb 2006 10:02:45 -0800
Ron,
Will this procedure work if you have the Ethernet set to "Force Download"?
Herb
----- Original Message -----
From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, February 15, 2006 9:48 AM
Subject: [amayausers] Re: Error questions now
>I don't know if you know this or not,
> sorry if you did I mean no offense.
> but, when you restart the machine
> and the design reloads, you don't use the move
> keys and go to the xy coordinates that you had written down at the
> time of lock up, but do write down the stitch number its at.
>
> then you go to the "Tools" drop down and choose "Move to last origin"
> and it will move to where you started the last design- NOT the
> spot where it shut down, the place where you were at when you pushed the
> start button for the first time.
>
> at that point go to the settings drop down and then the move tab
> and enter the stitch count you wrote down into the "move to stitch number"
> box, then you can back up any needed stitches and should be ready to go!
>
> Good Luck
>
> Ron Vinyard
> Body Cover / Magic Stitches
>
> 1-888-435-0176
> 541-471-1504 Fax 541-471-0427
>
> 420 SW H Street, Grants Pass, OR 97526-2532
>
> info@xxxxxxxxxxxxxxxxxxx
> www.bodycoverdesign.com
>
> ----- Original Message -----
> From: "Childs" <impressingpromo@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, February 14, 2006 10:58 PM
> Subject: [amayausers] Error questions now
>
>
>> Hello All,
>> Since loading the new updates last week, we have started getting some new
>> error messages from our unhappy red head. The common
>> one that is oh so wanting to leave a knot on her head is: "cluster
>> invalid, master machine detached from system" This has
>> happend about 4 or 5 times in the past couple of nights. The only thing
>> it will respond to at this point is to power down. Twice
>> we have lost the hat because when we move it back to the position
>> cordinates, the regestration is way off. Any suggestions to
>> what we might be doing wrong? Regestration is really giving us fitts
>> too, which is a new problem. We also are still having no
>> luck with the auto feed.
>>
>> We work this stuff in the evenings right now, so please don't get
>> discouraged if you don't see us reply right away, all of your
>> help and suggestions are greatly appreciated.
>>
>> Thank you,
>> Jimbo & Tara Childs
>> Impressing Promotions, LLC
>> 2575 Campus Dr., Ste. 341
>> Klamath Falls, OR 97601
>> Cell: 541-891-5748
>> Fax: 541-273-5798
>>
>>
>>
>
>
>
Other related posts:
