Its a feature in the newet software. I think you have to upgrade to ver 6
to have it.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: "Bob Purvis" <bob.purvis@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, December 15, 2005 5:41 PM
Subject: [amayausers] Re: Auto digitizing
Aaron, How do you find the auto MT feature?
thanks... Bob Purvis Island Embroidery
Linen Barn wrote:
You don't need a topping. I sew alot of my Carhartts without any backing or sometimes I use 3 oz cutaway if it has lots of stitches or is a thin lined jacket. I just sewed some with a 70k design on the back and hooped without backing and slid a piece iunder the jacket. This way I could be sure to get all the wrinkles out of the liner. As far as MT goes I use the newer software that automatically sets the MT so I am not sure, but would guess in the 18-22 range, also depends on if there is a seam in the back.
Aaron Sargent The Linen Barn linen@xxxxxxxxxxx Medford, OR ----- Original Message ----- From: "r.rinehartsr" <drader@xxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Wednesday, December 14, 2005 1:49 PM Subject: [amayausers] Re: Auto digitizing
Hi, If I may, I have a totally unrelated question regarding a project I will be undertaking tonight. I have 3 Carhart jackets on which I need to embroider a farm logo and farm name. They all have heavy fleece linings and I am concerned about what MT I should use. I figured a sharp 80/12 needle would be necessary but was not sure on the backing. It will have to be either a 2oz cutaway or a much lighter no show mesh. Also I didn't plan on using a topping, but if anyone thinks this would help, I can reconsider. Thanks for all the help. Debbie
----- Original Message ----- From: "Jeff Banks" <banksje@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, December 14, 2005 2:38 PM
Subject: [amayausers] Re: Auto digitizing
Jo,
What format are you saving it as from Paint? Use JPG or BMP. Then go to File Open in Design Shop, and change the File Type to All Graphics, then navigate to the folder where you saved the graphic file and open it.
Let me know if this does not work. Also, what version of Design Shop do you have? You have to have at least Design Shop Pro to open a bitmapped graphic. With Pro+ you will also have vector file capabilities.
Jeff Banks Melco Embroidery
----- Original Message ----- From: "Jo Leftwich" <leftwichjo@xxxxxxxxx> To: "Amaya" <amayausers@xxxxxxxxxxxxx> Sent: Wednesday, December 14, 2005 5:46 AM Subject: [amayausers] Auto digitizing
Please tell me what to do to get a design from Paint to Design Shop. I have a business card I scanned, enlarged to the size I need, cleaned it up in the Paint program, and cannot get it into Design Shop. I thought this would be a great design for auto-digitizing but have never tried this before. What am I not doing??
Jo
Jo Just Sew It Custom Embroidery
--------------------------------- Yahoo! Shopping Find Great Deals on Holiday Gifts at Yahoo! Shopping
