This message was posted by laysondesigns on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/12.html I have recently purchased the 7-in-1 Fast Frames from MelcoMart. I am experiencing many thread breaks using the 6" Radius Hat frame. What am I doing wrong. I'm using the sticky backing, I've adjusted to a slower speed, and I mean slower. I've tried different setting on the Acti-Feed from Auto to Standard settings. I've raised and lowered the pressure foot. I thought these were suppose to help in making production faster. How is that possible if I have to keep re-threading the needles. Is there something that I'm missing, some settings that I'm not doing. For the heck-of-it, I hooped up a cap on a 15cm round hoop and ran the same design with out changing any settings, and it ran all the way through with no problems. Please help me.......... =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================