Il 17/02/2017 18:37, mariano.ernesto ha scritto:
Hi Davide
FYI, I got the DMA board and it works OK in the JS128.
The only issue is mechanical: the Spectrum+ case doesn't completely
close with the board fitted.
It is necessary to remove 2 screws from tbe keyboard backplate and
replace the case screws with new ones 15mm long.
4mm plastic screw spacers are also required for the screws so the case
closes more or less ok.
It is also required to supplement 3-4 mm the place in the cover where
the feet springs touch.
At the end the the result is acceptable from the mechanical point of view.
