[zxspectrum] Re: Z80 DMA

  • From: Davide Barlotti <davide.barlotti@xxxxxxxxxx>
  • To: "zxspectrum@xxxxxxxxxxxxx" <zxspectrum@xxxxxxxxxxxxx>
  • Date: Sat, 18 Feb 2017 10:50:48 +0000

Hi Mariano,

Nice to know and see, lift a little the top remember me the tuning on the cars 
where we lift up the cover due the motor pimped !

Do you have try to use the multitech picture slide?



Davide Barlotti
On 18 Feb 2017, at 01:37, mariano.ernesto 
<mariano.ernesto@xxxxxxxxxxxx<mailto:mariano.ernesto@xxxxxxxxxxxx>> wrote:

Hi Davide

FYI, I got the DMA board and it works OK in the JS128.

The only issue is mechanical: the Spectrum+ case doesn't completely close with 
the board fitted.
It is necessary to remove 2 screws from tbe keyboard backplate and replace the 
case screws with new ones 15mm long.
4mm plastic screw spacers are also required for the screws so the case closes 
more or less ok.
It is also required to supplement 3-4 mm the place in the cover where the feet 
springs touch.

At the end the the result is acceptable from the mechanical point of view.

Regards.

Enviado desde mi smartphone Samsung Galaxy.

-------- Mensaje original --------
De: Davide Barlotti 
<davide.barlotti@xxxxxxxxxx<mailto:davide.barlotti@xxxxxxxxxx>>
Fecha: 8/2/17 3:01 (GMT+01:00)
Para: zxspectrum@xxxxxxxxxxxxx<mailto:zxspectrum@xxxxxxxxxxxxx>
Asunto: [zxspectrum] Re: Z80 DMA


Hi Mariano,
exactly I bought the DMA board on SellMyRetro from Zaxon/Piotr.
I didn't try, I have one JS128K but not here to test in short time.
Anyway I think you can enquire Piotr on Q&A section
http://www.sellmyretro.com/offer/details/zx-spectrum-128-dma-interface-datagear-20118

He produce both boards and should be in condition to verify.

Davide


Da: zxspectrum-bounce@xxxxxxxxxxxxx<mailto:zxspectrum-bounce@xxxxxxxxxxxxx
<zxspectrum-bounce@xxxxxxxxxxxxx<mailto:zxspectrum-bounce@xxxxxxxxxxxxx>> per 
conto di Mariano Ernesto Cividino 
<mariano.ernesto@xxxxxxxxxxxx<mailto:mariano.ernesto@xxxxxxxxxxxx>>
Inviato: martedì 7 febbraio 2017 22.51
A: zxspectrum@xxxxxxxxxxxxx<mailto:zxspectrum@xxxxxxxxxxxxx>
Oggetto: [zxspectrum] Re: Z80 DMA

Hi Davide,

Where did you get the DMA board from Piotr? Sell my retro?

Do you know if the Just Speccy 128 would support it?


Thanks.


On 2/7/2017 5:24 PM, Davide Barlotti wrote:

Guardate un po cosa succede a mettere uno Z80 DMA dentro lo Spectrum

https://youtu.be/COVGS0FEBtY


YouTube
youtu.be<http://youtu.be>
and share it all with friends, family, and the world on YouTube.







Other related posts: