Re: what might I be doing incorrectly?
- From: Dan Eickmeier <va3ets1@xxxxxxxxxx>
- To: winamp4theblind@xxxxxxxxxxxxx
- Date: Sat, 05 Jun 2004 20:42:08 -0400
Hi Marty,
First of all what version of the shoutcast plugin are you using?
Secondly, if you have the what you hear option checked in your record
controls, and your mic unmuted in your play controls, you won't need the
line recording plug in at all, you could just use the switch on your mic.
HTH
at 05:34 PM 6/5/2004 -0700, Marty Rimpau wrote:
>Hi all, I know I wrote a message about this, and never got a response,
>so I'll try one more time, and that is, I had written regarding a
>problem where I couldn't use line recording, because even though it
>showed up in the title bar, my voice wouldn't go out over the air, as
>exhibited by several files I had recorded for testing purposes, so, it
>was suggested I check what you hear, and I've done that, and the what
>you hear volume is as loud as it will go, yet, when I play the file
>back, I still hear gaps between the songs, so, what am I doing
>incorrectly, or, what am I not supposed to do? Here's what I do, I
>have the shoutcast server set up, and I stream at the default of 24
>kbps at 22050 hertz mono with ten listeners, and so with nothing
>selected, in preferences, I first select the sqr version 1.65 cross
>fader plugin, then from the dsp portion of the tree-view, I press the
>letter A twice, for the audio stocker shout muxer.dll, the shoutcast
>window comes up, I close the window, and go in to the system tray,
>double left click on the shoutcast source, and press the connect
>button, after starting the shoutcast server, and updating my ip
>address, with dyndns.org, and start my test playlist, and I hear the
>songs cross fade like a radio station, yet, when I play the mp3 back,
>since I haven't announced, there are gaps in the stream, and the what
>you hear option is checked in the recording properties of my sound
>blaster live card, and when I check in the play options, wave direct
>sound is at 0, the microphone is at 112, the line in is muted, for some
>reason, and when I unmute it, the microphone gets muted, so I unmute
>the microphone, but everything else is at 0, the highest it will go
>according to window-eyes, so, either something isn't showing in play
>that should be showing, or something isn't loud enough, and the only
>thing I can think of, is that the pc speaker volume is at 32, but I
>don't see what difference that makes, since I don't know why I would
>use that, but if something isn't showing, that should, please let me
>know, because I don't know why, the listeners can't hear what I hear.
>Now, in the sqr cross fader plug-in, there is no second in command, but
>that shouldn't make a difference, but when there was a second in
>command, like the audio stocker and shoutcast muxer.dll, if what you
>hear wasn't selected, and the advanced controls weren't checked, then
>the listeners would hear the segways, but not my voice, so, I don't
>know what's going on, with winamp 2.92, windows 98 se, window-eyes
>4.5sp3, 192 megs of ram, and a 400 megs processor, the shoutcast
>version 1.80 plugin, and the sqr crossfader version 1.65. I wonder
>what setting isn't correct, and can't think of a reason why this won't
>work. Thanks for helping in advance, but I'm sorry to bother the list
>with this message again. Incidently, I forgot to mention that after
>going in to the shoutcast source window, I have to check the advanced
>check box every time, unless I leave the audio stocker shoutcast
>muxer.dll selected, but after finishing a broadcast, i turn everything
>off.
>Marty
>
>
>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>
> To unsubscribe from this mailing list, please send a message to:
>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>subject line.
> Archives located at:
>//www.freelists.org/archives/winamp4theblind>
> If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list directly.
>Instead, please contact
>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
Dan In Brantford, Ontario, Canada.
Amateur radio station VA3ets.
EchoLink node number:6165
To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
To unsubscribe from this mailing list, please send a message to:
winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
Archives located at:
//www.freelists.org/archives/winamp4theblind>
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list directly. Instead,
please contact
the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
Other related posts:
