Hi Floyd
If you arrow through the set zoom ratios with Ctrl + Left or right arrow you
will find you'll move greater or lower distances when using the arrow keys to
move through the project.
For example when the zoom ratio is at 10 mins, then the left right arrow keys
move 350ms in the project I've got open. Or with the zoom ratio set to 1 sec,
then it takes 2 press per millisecond.
If you want to move greater distances then I'd suggest using section left and
right, Ctrl + Alt + - or =.
Hope the above helps.
Best
Ian
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of floyd white
Sent: 29 March 2021 17:22
To: vipaudioaccess <vipaudioaccess@xxxxxxxxxxxxx>
Subject: [vipaudioaccess] zoom ratio
Hi guys,
I've been using Samplitude for quite awhile now but I have to admit I do not
understand how it works.
Sorry.
I simply want to be in hours minutes seconds. And I am.
However, if I am supposed to be able to change how much left/right arrows move
when pressing alt shift f1, f2, f3 and f4, that does not happen. Each arrow
press remains the same amount of time no matter which is pressed.
If this is clear in the read me, I don't find it there.
I've been the the snap options but I really don't get the relationship.
So if I want to move by one millisecond and then change to a longer amount, how
do I do that?
Thanks,
Floyd...
e
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
