I guess that must be the key. Though I don't remember it as that.
I had tried that. Didn't make a difference.
Thanks,
Floyd...
On 3/3/21, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
Hi Floyd. The other keystroke I think you're on about could be alt enter to--
maximize the track. Just keep an eye on things, please excuse the pun!
Best Steve.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of floyd white
Sent: 03 March 2021 21:28
To: vipaudioaccess <vipaudioaccess@xxxxxxxxxxxxx>
Subject: [vipaudioaccess] Re: track navigation locks up
Hi all,
Thanks for responding.
Steve,
I will try the things you suggest when it happens again.
It's not at all consistent with anything I can determine.
I do wonder if it might be a keystroke that I press by mistake though.
Something else was going on on the track I was stuck on as well.
Monitoring was stuck on too.
Shut it off with app plus control, then tabbing in and out of that column
turned it back on.
Can you tell me what that other keystroke is beside jaws plus escape that
does a sort of refresh though I don't remember what it is actually called.
Didn't it used to be control plus p?
Thanks,
Floyd...
On 3/3/21, floyd white <cavernrecording@xxxxxxxxx> wrote:
Hi guys,--
This has happened at least half a dozen times to me and am wondering
if anyone else has had this happen and how you resolve it.
Working always in an audio project, when I attempt to use up/down
arrows to move to another track, the cursor sticks on the track I'm
on.
I can usually move to the top/bottom with control plus up/down and
control plus shift plus up/down will move but then sticks wherever it
lands.
I am able to tab and shift tab through columns and bring up the
effects routing window no problem.
And the transport functions work fine.
I try refreshing. No luck. I get out of Samplitude and restart.
Problem is still there.
* There's another key combination that works instead of refresh. I
can't find it. I thought it was control plus p. That didn't work.
Does anyone remember what that is?
Also, on at least one track, when I pressed g to try and go to
effects, it told me that was unavailable because it was a tempo track.
Nothing should have been a tempo track. If I somehow caused this with
a keystroke, how do I get rid of that and go back to audio track?
I've been able to get rid of this issue only after restarting
Samplitude a number of times. Not sure about rebooting.
Any help would be appreciated,
Thanks,
Floyd...
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
