You also might consider using some compression and limiting in your post
production, to bring the average level up.
It really depends on the use of these voice overs, sometimes a client wants the
cultured public radio type announcement other times they want more impact, like
a big-time wrestling announcement.
You may want to talk with your client and find out the end used for the
announcements to give you a better idea of exactly what they want.
In any case, I would never go above about -.5 dB on maximum level.
On Mar 22, 2021, at 10:15 AM, (null) soundsgood <soundsgood@xxxxxxxxxxxxxxx>
wrote:
On Mar 22, 2021, at 6:03 AM, il@xxxxxxxxxxxxx wrote:
Hi Christian
Firstly, I would still record at 44.1kHz 24bit and export the files at the
required sample and bit rate. This maximises audio quality. Secondly, are
you on a PC using JAWS and the Snowman scripts for SF? If so, then you can
check the level going into SF with the F11 or F12 keys, you can also
automatically check for clipping by double pressing the F12 key which turns
on detect clipping. You turn it off again by the same keystroke.
Hope the above helps
Ian
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of Christian
Sent: 22 March 2021 08:50
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Monitoring volume question
Hi Ian,
Thank you so much for your reply. Well, this is going to be recorded for a
phone system at 16 bit 8000 khz mono. I can definitely send you a sample
recording. What is the best way to check the volume of the recording? Many
thanks for any help, Christian
--22 mars 2021 kl. 06:33 skrev il@xxxxxxxxxxxxx:
Hi Christian
During recording, you really need some headroom, -6 to -12 dB levels
are fine even -18 is OK. You can then bring those levels up
afterwards. I assume you'll be recording at at least 44.1kHz at 24bit?
What do you mean by "Since I want the recordings to be balanced in volume"?
Some of this is down to the voice and how good they are. A
non-professional with little understanding of mic technique can be
difficult to record as they will move around and pull off the mic etc.
If you're using a professional voice then you'll have less trouble.
My advice would be to try and do some test recordings prior to the
job. You can then get a feel for mic positioning and the type of level
coming in to SF. I'd be happy to have a listen to these, please get in
touch off-list.
All the best
Ian
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of Christian
Sent: 21 March 2021 22:07
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Monitoring volume question
Hi all,
I am going to do some voiceovers for a company and I'll be using Sound
Forge for recording.
Just want to hear some tips from you. Since I want the recordings to
be balanced in volume, then it is 0DB I suppose? Any tips when
recording voice for good levels so that it will not be too quiet or so?
Many thanks for any help,
Christian
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
