Hi JP. I tried this and got the same results as yourself. Jaws just goes into
meltdown, but it did the same when the default scripts were loaded as well. So,
I guess this is something with samplitude and a bit too difficult to nail down
at the moment. I’ll put in the text you sent in the read me as a solution stop
gap for now.
Best steve.
Samplitude Access-The Gateway To Pro Recording With Samplitude For the Visually
Impaired: www.samplitudeaccess.org.uk <http://www.samplitudeaccess.org.uk>
Follow me on Twitter:
stevesax123
Contact me:
Mobile:
+44 (0)7733373714
E-Mail:
stevespamer68@xxxxxxxxx
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of Jean-philippe Rykiel
Sent: 19 March 2021 11:48
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Last call.
sorry Steve. I forgot.
So, first, please check if you have the same issue I'm having.
1, Find a Drum track or something With as many transients as you can think of.
2, Open the Audio quantise wizard, set the detection sensitivity to something
above 50, click the split at transients button, and After the operation is
completed, tab through controls until you reach the sensitivity slider again.
See if Jaws stops speaking speaking their. I will mention here that I was
tabbing backwards, shift tab, because I was using triplets as my quantise
value, and There is no swing value for triplets, but for a reason I ignore, you
cannot tab any further than that point.
If you Have the issue I'm having, just add the following to the audio quantise
wizard chapter in the Keystrokes document:
after Setting Quantize value and transient detection sensitivity To your
liking, tab to the one click button and click it. This will perform split at
transients, quantize And fill gaps between objects successively.
If you would rather do these operations separately, Click the split at
transients button Instead, then leave the wizard and perform The quantize and
fill gaps operations One by one from the tempo Menu where you will find a
button for each of them, Including hard or soft quantize.
End of text, please correct My English mistakes if any.
Best,
JPR
http://www.jprykiel.com
https://www.youtube.com/c/jprykiel
http://soundcloud.com/ryksounet
https://www.youtube.com/c/jprykielhttp://facebook.com/jeanphilipperykiel ;
<https://www.youtube.com/c/jprykielhttp:/facebook.com/jeanphilipperykiel>
Le 19/03/2021 à 12:09, Steve Spamer a écrit :
Hi folks. I know JP has mentioned he would like to see something about the
audio quantize dialog in the read me, as he found a solution to something he
was doing. So, this is a final call to anyone who has a minor issue with the
scripts to report it. JP, if you want something added, please send it along. I
will probably release them over the weekend. tHX
Best steve.
Samplitude Access-The Gateway To Pro Recording With Samplitude For the Visually
Impaired: www.samplitudeaccess.org.uk <http://www.samplitudeaccess.org.uk>
Follow me on Twitter:
stevesax123
Contact me:
Mobile:
+44 (0)7733373714
E-Mail:
stevespamer68@xxxxxxxxx <mailto:stevespamer68@xxxxxxxxx>
