Hi Ian. I also just checked and that particular part wasn't updated with the
new keystroke, but it was in another part of the doc. Anyway, try control
alt shift C. This was changed to allow for more logical keystrokes for
temporary ungrouping and grouping objects, which took the control alt shift
U keystroke.
It wasn't assigned either in the scripts, but this doesn't affect opening
it. So, just pressing that control alt shift C keystroke should open the
curve generator. I haven't messed too much in there, but it basically gives
you a bunch of options to write specific automation. Thanks for pointing
stuff out.
Best Steve.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of il@xxxxxxxxxxxxx
Sent: 03 April 2021 09:58
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Automation curve generator
Hi Steve
I've been looking through the keystroke doc this morning. And came across
the automation curve generator. Wondering what it was, I tried opening it
with the keystroke below, with no success. Here's the extract from the
keystrokes doc:
Automation Curve Generator
The following JAWS keystrokes only apply within the Automation Curve
Generator Window:
To open the Automation Curve Generator, press Control plus Alt plus Shift
plus U whilst in the VIP/Arranger Window.
Press Tab and Shift plus Tab to move through Controls.
Press Enter to activate a Control.
And press Control plus F4 to close the Automation Curve Generator Window.
Firstly, what is it? And, is it still accessible to us or does it no longer
exist?
I also realised that the action to temporarily ungroup all objects is the
same keystroke, Ctrl + Alt + Shift + U. So there seems to be a conflict
here as well.
Any thoughts welcome.
All the best
Ian
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
