Hi Steve
That would be correct.
Best
Ian
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of Steve Spamer
Sent: 03 April 2021 22:26
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Automation curve generator
Ok, so it should say " the following keystrokes only apply within the file
browser", is that correct?
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of il@xxxxxxxxxxxxx
Sent: 03 April 2021 12:45
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Automation curve generator
Hi Steve
It seems to be Ctrl + Alt + Shift + C, and I've had a look and I've no idea...
😊 I'll have a play round in a test project later to see what it does.
One other thing I found in the keystroke doc. File Browser states:
File Browser
The following JAWS keystrokes only apply within the Take Manager:
I think that should be the VIP arranger as I tried both and it wouldn't open in
the take manager. I think there's been a great improvement to the file browser
as I was able to easily import files into a test project using it.
All good stuff!
All the best
Ian
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of Steve Spamer
Sent: 03 April 2021 12:14
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Automation curve generator
Hi Ian. I also just checked and that particular part wasn't updated with the
new keystroke, but it was in another part of the doc. Anyway, try control alt
shift C. This was changed to allow for more logical keystrokes for temporary
ungrouping and grouping objects, which took the control alt shift U keystroke.
It wasn't assigned either in the scripts, but this doesn't affect opening it.
So, just pressing that control alt shift C keystroke should open the curve
generator. I haven't messed too much in there, but it basically gives you a
bunch of options to write specific automation. Thanks for pointing stuff out.
Best Steve.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of il@xxxxxxxxxxxxx
Sent: 03 April 2021 09:58
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Automation curve generator
Hi Steve
I've been looking through the keystroke doc this morning. And came across the
automation curve generator. Wondering what it was, I tried opening it with the
keystroke below, with no success. Here's the extract from the keystrokes doc:
Automation Curve Generator
The following JAWS keystrokes only apply within the Automation Curve Generator
Window:
To open the Automation Curve Generator, press Control plus Alt plus Shift plus
U whilst in the VIP/Arranger Window.
Press Tab and Shift plus Tab to move through Controls.
Press Enter to activate a Control.
And press Control plus F4 to close the Automation Curve Generator Window.
Firstly, what is it? And, is it still accessible to us or does it no longer
exist?
I also realised that the action to temporarily ungroup all objects is the same
keystroke, Ctrl + Alt + Shift + U. So there seems to be a conflict here as
well.
Any thoughts welcome.
All the best
Ian
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
