Hi Mary, you need to do the following; 1.While in this screen, "route jaws to PC". This is done by pressing and holding down the "insert key, bottom left edge of the numpad and then pressing the minus key, top right edge of the numpad. This brings the two cursors together. 2. Press the numpad "9" key to do a "page up" so that you start at the top of the active screen. 3. Now use the numpad keyboard like a set of arrow keys, "numpad 8 brings you up a line at a time while numpad 2 brings you down a line at a time and numpad 4 and 6 bring you left or right a character at a time. 3. When you have carried out the first instruction above, use the numpad key "2" to arrow down through the information and eventually you will come to the line where the information you require is located. Jaws will read it out for you or whomever is using it. Paul. ******************************************************************** NOTICE: The information contained in this email and any attachments is confidential and may be privileged. If you are not the intended recipient you should not use, disclose, distribute or copy any of the content of it or of any attachment; you are requested to notify the sender immediately of your receipt of the email and then to delete it and any attachments from your system. NCBI endeavours to ensure that emails and any attachments generated by its staff are free from viruses or other contaminants. However, it cannot accept any responsibility for any such which are transmitted. We therefore recommend you scan all attachments. Please note that the statements and views expressed in this email and any attachments are those of the author and do not necessarily represent the views of NCBI ********************************************************************