[uae] Segfaulting on startup
- From: "Richard Sweeney" <riksweeney@xxxxxxxxxxx>
- To: uae@xxxxxxxxxxxxx
- Date: Sat, 27 May 2006 12:02:40 +0000
Hi,
I'm using the latest stable build (E-UAE 0.8.28) with Fedora Core 5, but it
is segfaulting when I try to run it. I get as far as the GUI, but after I
unselect Pause, I get the following output to the console:
SDLGFX: Added P96 mode: 320x200x32
SDLGFX: Added P96 mode: 320x200x8
SDLGFX: Added P96 mode: 320x240x32
SDLGFX: Added P96 mode: 320x240x8
SDLGFX: Added P96 mode: 320x256x32
SDLGFX: Added P96 mode: 320x256x8
SDLGFX: Added P96 mode: 320x400x32
SDLGFX: Added P96 mode: 320x400x8
SDLGFX: Added P96 mode: 640x350x32
SDLGFX: Added P96 mode: 640x350x8
SDLGFX: Added P96 mode: 640x480x32
SDLGFX: Added P96 mode: 640x480x8
SDLGFX: Added P96 mode: 640x512x32
SDLGFX: Added P96 mode: 640x512x8
SDLGFX: Added P96 mode: 800x600x32
SDLGFX: Added P96 mode: 800x600x8
SDLGFX: Added P96 mode: 1024x768x32
SDLGFX: Added P96 mode: 1024x768x8
SDLGFX: Added P96 mode: 1280x800x32
SDLGFX: Added P96 mode: 1280x800x8
SDLGFX: Added P96 mode: 640x400x32
SDLGFX: Added P96 mode: 640x400x8
SDLGFX: Added P96 mode: 512x384x32
SDLGFX: Added P96 mode: 512x384x8
SDLGFX: Added P96 mode: 400x300x32
SDLGFX: Added P96 mode: 400x300x8
No disk in drive 0.
Building CPU table for configuration: 68000 24-bit addressing
1866 CPU functions
Building CPU function table, 44736 opcodes (0 0 1).
Segmentation fault
That's probably not particularly helpful. I tried to build the WIP2 but the
build fails (I can't remember what the message was).
I think that this is related to FC5 as I didn't have this issue with FC3.
Are there any additional options I can use to increase verbosity and see
exactly what the error is?
Thanks
Richard
Other related posts:
