OK; I'll see what I've got.
----- Original Message -----
From: Duke Nukem
To: torontocbm@xxxxxxxxxxxxx
Sent: Monday, February 12, 2018 11:09 AM
Subject: [torontocbm] Re: (no subject)
I;m going to be at the next TPUG meeting as I'm dropping off something to be
soldered with Joe and because I live so close. That's generous of you...maybe
I can return a favour later in the future.
Regards,
-Mark.
Sent: Monday, February 12, 2018 at 11:06 AM
From: "Mike Stein" <mhs.stein@xxxxxxxxx>
To: torontocbm@xxxxxxxxxxxxx
Subject: [torontocbm] Re: (no subject)
If you can make it to the next TPUG meeting I can give you some 2764s and
some 27128; I'll have to look if they're 'C' or not but they're free ;-)
Not sure if I have any '256s to spare.
m
----- Original Message -----
From: Duke Nukem
To: torontocbm@xxxxxxxxxxxxx
Sent: Sunday, February 11, 2018 11:42 PM
Subject: [torontocbm] Re: (no subject)
I'm right by the Etobicoke/Mississauga border in the GTA.
-Mark.
Sent: Sunday, February 11, 2018 at 10:04 PM
From: "Mike Stein" <mhs.stein@xxxxxxxxx>
To: torontocbm@xxxxxxxxxxxxx
Subject: [torontocbm] Re: (no subject)
Where in North America?
----- Original Message -----
From: Duke Nukem
To: Toronto CBM
Sent: Friday, February 09, 2018 1:27 AM
Subject: (no subject)
I posted this on Lemon 64 but I think TPUG members may be able to provide
a better answer since many users are here in Canada so MUST have some Members
that have had to solve the same issue below:
Okay, I broke down and decided to buy an EPROM Burner and it'll take a
little time to ship of course). Now, I want mainly to burn Kernal ROMs for my
1541C's which drive knock every time I turn them on for starters. Also have a
dead Char. ROM or 2 etc. So aside from fixing those and tinkering with making
some Carts I also want to play with making a few PLAs using the AT27C512R-45
chip so what do you recommend cause I've found some listings:
1) 10pcs/lot M27C256B-10F1 M27C256B 27C256 DIP-28 IC
2) 10PCS M27C128-10F1 27C128
3) AM27C256-150D AM27C256 27C256
Just to list a few but obviously these seem to ALL be sourced from China
and I've read stories where ppl swear they're recycled parts.
Any links and/or recommendations would GREATLY be welcome especially
given the above applications I have for my future EPROM Burner. Especially
source and Brand.
Just keep in mind I'm in North America.
Thanks.
-Mark.
