Yes that's what I'm doing. Check that the User Port config is set to
Dynamic.
On Mon., Dec. 6, 2021, 12:54 p.m. Glenn Holmer, <dmarc-noreply@xxxxxxxxxxxxx>
wrote:
On 12/5/21 11:43, Leif Bloomquist wrote:
I have the exact same issue. A quick soft reset of the Ultimate 64 with
the button+F5 brings it back to life, and it's fine until the next cold
boot, so fortunately it's only a minor inconvenience.
Exactly how are you doing this? I hit the reset button, then from the F5
menu "Reset C64" or either "Reboot C64", but the screen stays black.
On Sun., Dec. 5, 2021, 10:06 a.m. Glenn Holmer,wrote:
<dmarc-noreply@xxxxxxxxxxxxx <mailto:dmarc-noreply@xxxxxxxxxxxxx>>
blue
There was a brief discussion in one of the chats during WoC about
issues
when using a Super Snapshot with an Ultimate 64 running the latest
firmware (3.10a). Symptom is failure to start, with blank black or
screen. Failure mode appears to be identical whether using the
cartrdige
image shipped with the ROM or a real Super Snapshot.
Is anybody else familiar with this issue?
--
Glenn Holmer (Linux registered user #16682)
"After the vintage season came the aftermath -- and Cenbe."