Thanks!
From: torontocbm-bounce@xxxxxxxxxxxxx [mailto:torontocbm-bounce@xxxxxxxxxxxxx] ;
On Behalf Of Dan Gahlinger
Sent: Friday, December 24, 2021 2:29 PM
To: torontocbm
Subject: [torontocbm] Re: Having trouble with Foenix 256 U+
Brian
Ultimate II+
See ultimate64 here
https://ultimate64.com/
The elite is the best 64 replacement
On Fri., Dec. 24, 2021, 14:21 Brian Lyons,
<brian@xxxxxxxxxxx<mailto:brian@xxxxxxxxxxx>> wrote:
Is this related to Commodore hardware?
I have never heard of a U+ or EVID-200
From: torontocbm-bounce@xxxxxxxxxxxxx<mailto:torontocbm-bounce@xxxxxxxxxxxxx>
[mailto:torontocbm-bounce@xxxxxxxxxxxxx<mailto:torontocbm-bounce@xxxxxxxxxxxxx>]
On Behalf Of marlon schmitt
Sent: Friday, December 24, 2021 9:09 AM
To: torontocbm-bounce@xxxxxxxxxxxxx<mailto:torontocbm-bounce@xxxxxxxxxxxxx>;
torontocbm@xxxxxxxxxxxxx<mailto:torontocbm@xxxxxxxxxxxxx>
Subject: [torontocbm] Having trouble with Foenix 256 U+
Importance: High
Hello. I can't get my U+ to work. I just bought a new monitor cable and plugged
it in, so my monitor has power, and I firmly connected the DVI-D cable to my
monitor and the EVID-200 unit attached to my U+, but I get a No Device Attached
error, which I didn't get before. I also connected an RJ45 50' cable from my U+
to my router/modem in port 4, but port 4 won't light up like port 2 does, which
is attached to my Windows 10 computer. I have a power cable attached to my U+,
and when I turn the U+ on, all the lights turn on for an instant, then turn
off, so I know the U+ and EVID-200 both work. What should I do? - Marlon S.
