but it has a 25 pin adapter, not 15 pin.
so there's no way to plug a 1541 parallel connector into it.
I have a cable with IEC at one end and 25 pin card edge (female) at the
other,
I was thinking that would connect to this,
so you'd connect a PC parallel to the DB25 on this one,
that seems awfully convoluted...
I mean, it'd make more sense to plug the IEC into the drive and the DB25
right into the PC parallel
But the IEC is serial
Dan.
On Thu, Jun 11, 2020 at 11:07 PM Ian Colquhoun <icolquhoun@xxxxxxxxx> wrote:
That is either an XMP1541 or an XEP1541 adapter almost for sure.
http://sta.c64.org/xcables.html
On Thu, Jun 11, 2020 at 10:49 PM Dan Gahlinger <dgahling@xxxxxxxxx> wrote:
definitely some sort of drive adapter (I'm almost certain),
unless it's some sort of serial adapter
no markings, no (c) no writing at all.
it's just wiring, some diodes, so it's a simple connector
On Thu, Jun 11, 2020 at 10:44 PM Aaron Hamilton <aaronster@xxxxxxxxx>
wrote:
I thought it was some kind of printer parallel port.. but then I found
this video for a cassette drive adaptor
https://youtu.be/9q1KbPddxms
Aa
On Thu., Jun. 11, 2020, 10:32 p.m. Dan Gahlinger, <dgahling@xxxxxxxxx>
wrote:
it's some sort of commodore drive adapter,
but I've long forgotten what it's for or where I got it.
thanks
Dan.
--
Ian Colquhoun <icolquhoun@xxxxxxxxx>
