[THIN] Re: Workstations won't grab TS CAL unless Administrator
- From: Christopher Wilson <christofire@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Fri, 1 Oct 2004 14:24:42 -0500
Steve,
Losening the permissions on the MSLicensing key did the trick. You
mention removing *any* CAL's before imaging. Where else should I be
checking for and removing license certs?
Regarding locking the Citrix Workstation ID, I've definitely felt that
pain before. Fortunately using PN 8.0 we can set the Enable Dynamic
Client Name setting to keep the Citrix client in sync with the
computer name.
Thanks for the input.
Regards,
CW
On Fri, 1 Oct 2004 11:42:28 -0400, Steve Raffensberger
<sraffens1@xxxxxxxxxxx> wrote:
> Most likely, when the ICA client was installed on the image source machine,
> it was done by an administrator who then logged into a server to test it
> out. This would have gotten a CAL which is now being distributed to all your
> image recipients.
>
> You may have to remove the CAL as well as change permissions.
>
> When creating the image, it would be good to check for and remove any CAL's
> before capturing the image. Also, check that the image doesn't lock the
> Citrix workstation ID which makes multiple clients appear with the same
> name. Printer autocreation hates that.
>
> Raff
>
>
********************************************************
This Weeks Sponsor RTO Software
Do you know which applications are abusing your CPU and memory?
Would you like to learn? -- Free for a limited time!
Get the RTO Performance Analyzer to quickly learn the applications, users,
and time of day possible problems exist.
http://www.rtosoft.com/enter.asp?id=320
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
Other related posts: