[THIN] Re: UPHCLEAN on NT 4 TSE

  • From: "Berny Stapleton" <berny.stapleton@xxxxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Tue, 17 Jan 2006 17:01:48 -0000

Is spoolsv.exe doing anything? Just wondering if it's something related
to the notifications of winlogon regarding printers to other users.....

  _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Robert K Coffman Jr - Info From Data
Sent: 17 January 2006 16:53
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: UPHCLEAN on NT 4 TSE


Thanks Andrew and Jay.
 
Upon review, i'm not sure UPHCLEAN is going to help.  See
http://www.infofromdata.com/images/semainprob.jpg for a picture of my
problem.  This is a server that was fully loaded with users, and since
had all the users logged off.  A large number of processes are running
(SEMAIN20, CSRSS, and WINLOGON) and you can see that CPU is being
consumed, although nobody but me is currently logged in to the box.
Ultimately, with users on, the box pegs at 100% CPU with a large CPU
queue length and becomes unusable.  Its almost as though some cleanup
isn't happening at logoff.... 
 
Any thoughts/comments appreciated as always.
 
- Bob Coffman
 

        -----Original Message-----
        From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Dogers
        Sent: Tuesday, January 17, 2006 9:55 AM
        To: thin@xxxxxxxxxxxxx
        Subject: [THIN] Re: UPHCLEAN on NT 4 TSE
        
        
        Don't know about the current 1.5/6 version, but the older 1.2
(?) worked fine on our old TSE boxes before they were replaced.
        
        Andrew
        
        
        On 17/01/06, Robert K Coffman Jr - Info From Data
<bcoffman@xxxxxxxxxxxxxxxx> wrote: 

                Should the current UPHCLEAN work on NT 4 TSE?
                 
                I have a problem I think UPHCLEAN might help with and
I'd like to run it on these boxes, however in test I'm getting the
following error after reboot:
                 
                System Process - Driver Entry Point Not Found
                    The C:\wtsrv\system32\Drivers\uphcleanhlp.sys device
driver could not locate the entry point _except_handler3 in driver
ntoskrnl.exe.
                 
                Appears that UPHCLEAN would need to be compiled
differently to work on this platform, from my investigation of that
error.
                 
                Any help appreciated.  I just need to keep these boxes
limping along for another couple of months!
                 
                - Bob Coffman




________________________________________________________________________
This e-mail has been scanned for all viruses by Star. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________


______________________________________________________________________
The contents of this transmission are confidential. If you are not the
named addressee or if it has been addressed to you in error, please
notify the sender immediately and then delete this message. 
Any unauthorised copying and transmission is forbidden. Electronic
transmissions cannot be guaranteed to be secure. If verification is
required, please contact the sender.
______________________________________________________________________

Other related posts: