[THIN] Re: Slow printing
- From: "George Wasgatt" <gwasgatt@xxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 8 Dec 2005 09:40:13 -0500
Stop and restart the spool service. When it's stopped look in the spool
directory for any potentially bad files and clear them out.
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Berny Stapleton
Sent: Thursday, December 08, 2005 8:57 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Slow printing
Anyone know where to start looking when the spooling of printing slows to a
crawl?
Print jobs that normally take 2 seconds to come out are taking 23 seconds to
come out. Physically, nothing has changed, we installed a printer yesterday,
but that change has been backed out. Network wise, it looks fine, the print
server isn't doing much, servers are having it relatively easy. Just
printing in particular has slowed down. The rest of the environment isn't
exactly behaving like it's semi snappy self either...
Any suggestions?
Berny
______________________________________________________________________
The contents of this transmission are confidential. If you are not the
named addressee or if it has been addressed to you in error, please
notify the sender immediately and then delete this message.
Any unauthorised copying and transmission is forbidden. Electronic
transmissions cannot be guaranteed to be secure. If verification is
required, please contact the sender.
______________________________________________________________________
Other related posts:
