[THIN] Re: Server 2003 16 bit printing
- From: "White, Collin" <cwhite@xxxxxxxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Thu, 3 Jul 2003 16:16:19 -0400
Yes, it automatically redirects the printer using port TS003 (for example),
shows the printer name and computer name and lists the type of printer. I
can then print a test page or print from Word or Excel. Just can't print
from the 16 bit app
Collin
_____
From: Ron Oglesby [mailto:roglesby@xxxxxxxxxxxx]
Sent: Thursday, July 03, 2003 4:20 PM
To: thin@xxxxxxxxxxxxx
And in your session you have the LPT port mapped to what you want?
Ron Oglesby
Senior Technical Architect
RapidApp
Office 312.372.7188
Mobile 815.325.7618
email roglesby@xxxxxxxxxxxx <mailto:roglesby@xxxxxxxxxxxx>
-----Original Message-----
From: White, Collin [mailto:cwhite@xxxxxxxxxxxxxx]
Sent: Thursday, July 03, 2003 2:29 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Server 2003 16 bit printing
Hello everyone, I ma having problems printing from a 16 bit app on 2003
Terminal Services. I get a dos like message in the app that says Access is
Denied when trying to print. This same app printed no problem with 2000
Terminal Services. Does anybody know what is different between the two? Is
there a setting I have to change to allow 16 bit printing on 2003?
Thanks,
Collin White
This email message is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies
of the original message. Thank you.
This email message is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies
of the original message. Thank you.
Other related posts:
