[THIN] Re: Qserver command
- From: "Joe Shonk" <JShonk@xxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Mon, 24 Mar 2003 09:11:31 -0800
What's the purpose of have 2 ip address assigned to one server?
Joe
-----Original Message-----
From: Phil.Hillary@xxxxxxxxxxxxxxxxxx
[mailto:Phil.Hillary@xxxxxxxxxxxxxxxxxx]
Sent: Monday, March 24, 2003 9:59 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Qserver command
Hi all
I've got a server with two NIC's, 1 card configured with IP address of
130.11.10.251 and the other with 130.12.10.251. When I type the qserver
command, it resolves to the 130.12.10.251 and I want it to resolve to =
the
other address. =20
Reading the MF Admin Guide, it says: "On a server with 2 NIC's, the =
qserver
command only enumerates servers on 1 card's subnet at a time. To =
enumerate
the servers on the other card's subnet, specify the address of any =
server on
the subnet with the /tcpserver:x parameter." I do this and specify the
130.11.10.251 address, but when I type qserver again it still shows
130.12.10.251. Any ideas how I can get qserver to show the correct =
address?
I've unplugged the NIC leads from the 130.12.10.251 card and I've tried
stopping and starting the ICA Browser service, but no difference.
TIA
Phil Hillary
Technical Support
London Fire and Emergency Planning Authority
Tel: 020 7587 4019
Email: phil.hillary@xxxxxxxxxxxxxxxxxx
*************************************************************************=
***
SMOKE ALARMS SAVE LIVES
Go to London Fire at www.london-fire.gov.uk/firesafety=20
This email is confidential to the addressee only. If you do not believe =
that
you are the intended addressee, do not use, pass on or copy it in any =
way.
If you have received it in error, please delete it immediately and =
telephone
the number given, reversing the charges if necessary.
*********************************************************
This Week's Sponsor - RTO Software / TScale
TScale increases terminal server capacity.=20
Get 30-40% more users per server to save $$$ and time.=20
Add users now! - not more servers. If you're using Citrix,=20
you must learn about TScale! Free 30-day eval:
http://www.rtosoft.com/Enter.asp?ID=3D79
**********************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - Emergent Online
EOL's Universal Printer new Features include:
Network Printing, Pagestreaming, 2400 DPI.
No Client Software Required!
http://www.go-eol.com/
**********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
