[THIN] Re: OT - unattended DL380G4
- From: "Walter, Chris" <christopher.walter@xxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Wed, 16 Nov 2005 12:52:48 -0500
Happened to see this when looking at the fixes with W2k3SP1.
Article number 826508
An unattended installation of Windows Server 2003 cannot continue and you
receive a message with error code 18. It sounds like this fix was included
in 2003 SP1 but I would check it out.
Chris
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Adam.Baum@xxxxxxxxxxxxxx
Sent: Tuesday, November 15, 2005 11:15 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT - unattended DL380G4
I checked my CD and it's there. I have copied the current drivers all over
the place. Something is definitely amiss. Do you have any idea what error
code 18 means?
Thanks for the file..i checked and its the same one I've been using.
adam
Jeremy Saunders
<jeremy.saunders@
au1.ibm.com> To
Sent by: thin@xxxxxxxxxxxxx
thin-bounce@freel cc
ists.org
Subject
[THIN] Re: OT - unattended DL380G4
11/15/2005 08:49
AM
Please respond to
thin@xxxxxxxxxxxx
g
We've found that it is still required, and place it in the $OEM$\$$\OEMDir
folder. I'll zip it up and send it to you off the list.
Cheers.
Kind regards,
Jeremy Saunders
Senior Technical Specialist
ceruleanTM
an IBM Australia Company
formerly known as Logicalis
Level 2, 1060 Hay Street
West Perth WA 6005
AUSTRALIA
Visit us at
http://www.cerulean.com.au/
P: +61 8 9261 8412 F: +61 8 9261 8536
M: TBA E-mail:
Jeremy.saunders@xxxxxxxxxxx
Adam.Baum@cityofm
esa.org
Sent by: To
thin-bounce@freel thin@xxxxxxxxxxxxx
ists.org cc
Subject
15/11/2005 11:10 [THIN] OT - unattended DL380G4
PM
Please respond to
thin
All,
I am trying to create an unattended install for a DL380G4 using W2K3 w/SP1.
I'm using official MS media that already has SP1 embedded..one of the
benefits of our EA...anyway, I am following the method I have been using
for a few years now (Smartstart scripting toolkit).. After the Windows
setup program (text mode) has done its numerous file copies and then
actually starts the install, I get an error msg stating "Unable to load
\$oem$\cpqcissm.dll Error code 18". I checked my unattended.txt and
txtsetup.oem files to make sure that it was or was not listed. Both ways
still fail. If you download the latest version of the SmartArray6i driver,
this dll file is no longer provided. HP says that the latest version does
not use it.
So...how do I get windows to stop trying to load it? Better yet, what is
error code 18?
adam
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
Other related posts:
