Yes. We are using the Backup Agent. The Backup Priority has been set to HIGH. Also, the Remote Agent is at version 9.01 Build 2020. Chris -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Boggan Sent: Friday, October 24, 2003 1:55 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: OT: Really slow throughput with CA Brightstor ARCserve 9.01 Are you using the backup agent on the cluster? _________________________________ Michael Boggan Network Engineer/Citrix Admin Virtual Desktop Inc. Dallas, Texas Ph: (972) 960-6400 Fax: (972) 960-6445 email: mboggan@xxxxxxxxxxx http://www.virtualdesktopinc.com _________________________________ -----Original Message----- From: Chris Lynch [mailto:lynch00@xxxxxxx] Sent: Friday, October 24, 2003 3:51 PM To: thin@xxxxxxxxxxxxx Cc: john.rowlandson@xxxxxxxxxxxxx; 'Braebaum, Neil' Subject: [THIN] OT: Really slow throughput with CA Brightstor ARCserve 9.01 What do you guys use to backup your cluster? ARCserve, or BackupExec, or something else? What hardware are you using? What kinds of throughput are you seeing on you backups for the cluster? Basically, I have a throughput issue with ARCserve 9.01. While this is not my choice for backups, I need to resolve this issue. We have about 63GB of data to backup, and we are seeing about 110MB/minute. Now, you need to know something about the setup here. Backup Engine Server (1DC) ------------------------- Dell PowerEdge 2650 Dual PIII-2.0GHz MP XEON 4GB of RAM Broadcom GB NIC running at 1000MB/s with Full Duplex Windows 2000 Advanced Server with SP3 PERC3/di - RAID1/RAID5 (OS/Data) Cluster Server (cluster name: 1POCDATA; Cluster Nodes: 1POCFPA & 1POCFPB) ----------------------------- (2) Dell PowerEdge 2650 Dual PIII 3.06GHz MP XEON (533MHz FSB) 4GB of RAM (DDR) Broadcom GB NIC running at 1000MB/s with Full Duplex PERC3 and PERC4 - RAID1/RAID1/RAID5 (OS/Quorum/Data) Now, 1DC has the PERC3/di (which is the Ultra160 Controller with Ultra160 10K RPM drives) The cluster nodes have Ultra160 drives onboard, but the shared storage drives are Ultra320 on the PowerVault 220s (which is then connected to the PERC4 RAID card, Ultra320 performance). I contacted Dell to make sure nothing was wrong with the hardware, and we found nothing. We tested copying 5.5GB of data from 1DC to the cluster share. That took about 11.5 minutes. Then, copied the same data back from the cluster to 1DC. That took under 9 minutes. CA gave me the following reg keys to add to the cluster nodes: HKLM\software\computerassociates\BrightStor\client agent\parameters 1. change the decimal value for Maxsendpacketsize to 8192 2. change the decimal value for RecDaemonbuffercount to 800 3. change the decimal value for Receivetimeout to 4800 4. change the decimal value for sendtimeout to 4800 5. change the decimal value for setwsrecdbuffersize to 64 6. change the decimal value for setwssendbuffersize to 64 7. change the decimal value for setwstcpnodelay to 8 On the client agent admin window, select configuration and set the backup priority to high. I did this, but this has made the throughput worse. Man, I wish I had Veritas here. Oh well. Thanks for any input you could offer. Chris ******************************************************** This Week's Sponsor - NetX Inc. NOT all of your data resides at the server, can you backup and restore every PC in your company including remote systems ? FlexSafe protects your organization's data with client backup and recovery. Snapshots take just a few minutes, even for notebook users who connect through a dial-up modem. http://www.netxinc.com/product_flexsafe.asp ********************************************************** Useful Thin Client Computing Links are available at: http://thethin.net/links.cfm New! Online Thin Computing Magazine Site http://www.OnDemandAccess.com For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ******************************************************** This Week's Sponsor - NetX Inc. NOT all of your data resides at the server, can you backup and restore every PC in your company including remote systems ? FlexSafe protects your organization's data with client backup and recovery. Snapshots take just a few minutes, even for notebook users who connect through a dial-up modem. http://www.netxinc.com/product_flexsafe.asp ********************************************************** Useful Thin Client Computing Links are available at: http://thethin.net/links.cfm New! Online Thin Computing Magazine Site http://www.OnDemandAccess.com For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ******************************************************** This Week's Sponsor - NetX Inc. NOT all of your data resides at the server, can you backup and restore every PC in your company including remote systems ? FlexSafe protects your organization's data with client backup and recovery. Snapshots take just a few minutes, even for notebook users who connect through a dial-up modem. http://www.netxinc.com/product_flexsafe.asp ********************************************************** Useful Thin Client Computing Links are available at: http://thethin.net/links.cfm New! Online Thin Computing Magazine Site http://www.OnDemandAccess.com For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm