[THIN] Re: OT: Dell PowerEdge NIC's

  • From: George Yobst <george2@xxxxxxxxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Thu, 18 Dec 2003 13:34:48 -0800

Yes, they tried a gig switch and 2 100M switches.

Landin, Mark wrote:

Have you tried a different port on the switch side?

---
The T drive is not backed up



-----Original Message-----
From: George Yobst [mailto:george2@xxxxxxxxxxxxxxx] Sent: Wednesday, December 17, 2003 5:04 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Dell PowerEdge NIC's


They've tried both settings - nada.
It's like the thing just stops working after a few hours and they have to reboot the server to get it working.
Even installed a new motherboard - same thing.
-George


Landin, Mark wrote:

I had problems until I put the speed and duplex to auto. No other setting would work.

Scott



Interesting. "Auto" is usually the setting that results in the MOST trouble.


On this note, make sure if you ARE using auto, my advice is

to force


speed and duplex settings on both the server NIC and on the

switch on


the other end. If you have done this, then you might try

going to AUTO


on both instead.
********************************************************
This Week's Sponsor - 99Point9.Com Emergent Online EOL Universal Printer 4.0 Has arrived!
http://www.99point9.com/public/products/
*********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or set Digest or

Vacation mode


use the below link:
http://thethin.net/citrixlist.cfm



--
--------------------------------------------------------------
-------------
George Yobst, Library Technology Analyst phone: 503.723.4890
Library Information Network of Clackamas County fax: 503.794.8238
16239 SE McLoughlin Blvd, Suite 208 web: http://www.lincc.lib.or.us
Oak Grove, OR 97267-4654 email: george@xxxxxxxxxxxxxxx
"...it is impossible for anyone to begin to learn
what he thinks he already knows." - Epictetus


********************************************************
This Week's Sponsor - 99Point9.Com Emergent Online EOL Universal Printer 4.0 Has arrived!
http://www.99point9.com/public/products/
*********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm



********************************************************
This Week's Sponsor - 99Point9.Com Emergent Online
EOL Universal Printer 4.0 Has arrived!
http://www.99point9.com/public/products/
*********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm




--
---------------------------------------------------------------------------
George Yobst, Library Technology Analyst        phone: 503.723.4890
Library Information Network of Clackamas County   fax: 503.794.8238
16239 SE McLoughlin Blvd, Suite 208         web: http://www.lincc.lib.or.us
Oak Grove, OR 97267-4654                  email: george@xxxxxxxxxxxxxxx
"...it is impossible for anyone to begin to learn
 what he thinks he already knows."  - Epictetus

********************************************************
This Week's Sponsor - 99Point9.Com Emergent Online
EOL Universal Printer 4.0 Has arrived!
http://www.99point9.com/public/products/
*********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm

Other related posts: