assuming you are running standard ports and just Nfuse.... on the external ISA server open ports 80 and 443(if you are using SSL/TLS for the nfuse web site) to the Nfuse server and NAT appropriately if you are using NAT. On the internal ISA server, open up port 80 from the Nfuse server to the Metaframe servers that are running XML, again, you may be using NAT. If you are using CSG its a bit more complicated, but not rocket science. Jamie -----Original Message----- From: Stuart Pittwood [mailto:SPittwood@xxxxxxxxxxxxxxxxx] Sent: 17 March 2003 09:24 To: thin@xxxxxxxxxxxxx Subject: [THIN] Nfuse in DMZ Hi all, I have a back to back DMZ (MS ISA Server on both sides) with a web server in the middle. Can anyone point me to a good document detailing what needs to be done on the firewalls in order to have our web server run Nfuse classic and talk to the metaframe servers (XPa FR2) which are housed on the internal network. Thanks in advance Stu ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ************************************************************************************** THIS EMAIL AND ANY ATTACHED FILES IS/ARE CONFIDENTIAL AND LEGALLY PRIVILEGED. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify Dataplex Systems Limited on +44 (0) 161 707 3355 immediately and then delete this email. Email transmission cannot be guaranteed to be secure or error free as information could arrive late or incomplete, or contain viruses. Dataplex Systems Limited therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. If verification is required please request a hard copy version signed by or on behalf of Dataplex Systems Limited. Copyright in this email and any documents created by Dataplex Systems Limited will be and remain vested in Dataplex Systems Limited, we assert the right to be identified as the author of and to object to the misuse of this email and such documents. ************************************************************************************** ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ********************************************************* This Week's Sponsor - RTO Software / TScale TScale increases terminal server capacity. Get 30-40% more users per server to save $$$ and time. Add users now! - not more servers. If you're using Citrix, you must learn about TScale! Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=79 ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm