in my own experience with NIC Teaming and FEC, I have always had to = issue the "set port channel [ports] on " command. The ports are in = "desirable" mode by default but the traffic has only started flowing = after I force the ports to "on". Greg -----Original Message----- From: Jensen, Jay [mailto:jjensen@xxxxxxxxx] Sent: Monday, October 21, 2002 9:42 AM To: Thin Client E-mail Group (E-mail) Subject: [THIN] NIC Teaming and/or FEC Hi gang,=20 I am looking for a best practice article on NIC Teaming and/or using = Fast Ethernet Channel (FEC) on our MetaFrame Servers. I have found a lot of = good stuff on thethin and Citrix but nothing about Best Practices. I need to prove that we want to do this in our environment. I also am looking for = an tech article on setting the NIC''s to 100 mbs instead of using Auto-Negotiate. I believe in my reading that this was a fine tuning = tweak feature. =20 Thanks in advance for your help. Jay *********************************************** This weeks sponsor Emergent Online http://www.go-eol.com Visit Jim Kenzig of thethin.net at the Emergent Online Booth #221 at Citrix Iforum 2002! Register now at: http://www.citrixiforum.com/registerNow.html ***********************************************=20 For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm *********************************************** This weeks sponsor Emergent Online http://www.go-eol.com Visit Jim Kenzig of thethin.net at the Emergent Online Booth #221 at Citrix Iforum 2002! Register now at: http://www.citrixiforum.com/registerNow.html *********************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm