I was able to get the one server to work by re-installing Citrix, but changing these values in ProfileImagePath is MUCH easier. Tks very much for the tip. -matt On Mon, Sep 8, 2008 at 1:54 PM, TSguy92 Lan <tsguy92@xxxxxxxxx> wrote: > Matt, > > The registry value you adjusted defines the location of where NEW profiles > to the system would be created at. As well, of course, this setting is also > where windows will look for the default users and all user's folders to base > a new user's profile from. > > Any Existing profiles already on the system prior to you updating that > registry value, will already have their paths defined as being on > C:\documents and settings. > > To adjust existing profiles, you'd need to comb through the \ProfileList sub > keys, and under the SID's adjust the value for "ProfileImagePath" to the new > location that you've copied the local profiles too. > > The only user account that IMA should care about is the CitrixSMA account. > If you're doing a re-install of MF, either, update the ProfileImagePath for > the CitrixSMA user, or make sure that that account, it's profile and it's > listing under \profilelist is cleared off the system before you re-install. > > HTH > > Lan > > > On Mon, Sep 8, 2008 at 7:17 AM, Matt Kosht <matt.kosht@xxxxxxxxx> wrote: >> >> I didn't but I can try that. Tks. >> >> On Mon, Sep 8, 2008 at 10:13 AM, Jim Medeiros <jmedpc@xxxxxxxxx> wrote: >> > Did you try changing the registry and then install PS4.0? >> > >> > On Mon, Sep 8, 2008 at 10:07 AM, Matt Kosht <matt.kosht@xxxxxxxxx> >> > wrote: >> >> >> >> I built a new Citrix PS4.0/Windows 2003 server over the weekend. I was >> >> testing a performance tweak to put the user profiles on a seperate >> >> physical disk vs. the same disk as the apps and OS. I changed the >> >> HKLM\Software\Microsoft\Windows NT\Current >> >> Version\ProfileList\ProfilesDirectory from the default of >> >> %SystemDrive%\Documents and Settings to Z:\Documents and Settings (Z: >> >> being the seperate physical disk with nothing else on it, but the >> >> swapfile). From the old profile root I copied Citrix_Sma, Default >> >> User, All Users into the new profile root. This worked (or so I >> >> thought). When I tested a login the users roaming profile created in >> >> the correct area. When I rebooted the server however, the IMA service >> >> refused to start with error code -2147483647. I found this KB article >> >> http://support.citrix.com/article/CTX101949 which confirms this change >> >> caused the issue, but I am wondering how I could make IMA work with >> >> the new profile location. >> >> ************************************************ >> >> For Archives, RSS, to Unsubscribe, Subscribe or >> >> set Digest or Vacation mode use the below link: >> >> //www.freelists.org/list/thin >> >> NEW! Follow Thin List on Twitter! >> >> http://twitter.com/thinlist >> >> Thin List discussion is now available in blog format at: >> >> http://thinmaillist.blogspot.com >> >> HOT! Thinlist MOBILE Feed! >> >> http://thinlist.net/mobile >> >> Thinlist quick pick >> >> http://thinlist.net >> >> ************************************************ >> > >> > >> > >> > -- >> > Check out these great links: >> > Tactical Profit - http://www.iscribers.com/members/go.php?r=97&i=l3 >> > Republic Magazine - http://oftherepublic.com >> > Justice, Peace and Freedom Conference - >> > http://www.iscribers.com/members/go.php?r=97&i=l0 >> > Constitution Class - http://www.iscribers.com/members/go.php?r=97&i=l1 >> > How to prosper in Hard Times - >> > http://www.iscribers.com/members/go.php?r=97&i=l2 >> > >> > >> ************************************************ >> For Archives, RSS, to Unsubscribe, Subscribe or >> set Digest or Vacation mode use the below link: >> //www.freelists.org/list/thin >> NEW! Follow Thin List on Twitter! >> http://twitter.com/thinlist >> Thin List discussion is now available in blog format at: >> http://thinmaillist.blogspot.com >> HOT! Thinlist MOBILE Feed! >> http://thinlist.net/mobile >> Thinlist quick pick >> http://thinlist.net >> ************************************************ > > ************************************************ For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: //www.freelists.org/list/thin NEW! Follow Thin List on Twitter! http://twitter.com/thinlist Thin List discussion is now available in blog format at: http://thinmaillist.blogspot.com HOT! Thinlist MOBILE Feed! http://thinlist.net/mobile Thinlist quick pick http://thinlist.net ************************************************