[THIN] FW: Re: secure gateway
- From: "Matthew Shrewsbury" <MShrewsbury@xxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 9 Feb 2006 09:02:02 -0500
Ops never mind, I see you are talking about the "Secure Gateway". Sorry!
Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+
Senior Network Administrator
-----Original Message-----
From: Matthew Shrewsbury
Sent: Thursday, February 09, 2006 9:01 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: RE: [THIN] Re: secure gateway
I don't know if it applies in your case but you have to have WI4.2 if
you are using AG 4.0. Citrix said WI4.0 won't work with AG4.0.
Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+
Senior Network Administrator
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Greg Reese
Sent: Wednesday, February 08, 2006 5:00 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: secure gateway
i found the error 40. i had a typo in the WI config. fixed that and I
am now troubleshooting
SSL Error 5: An unclassifiesd SSL Error Ocurred (0x80090308 - the token
supplied to the function is invalid)
I just started at the Citrix website to track that down.
At least I am getting closer.
Greg
On 2/9/06, Jeff Pitsch <jepitsch@xxxxxxxxx> wrote:
I believe (off the top of my head) that 40 is FQDN's cannot be resolved
properly. Or it might be cert name is wrong as well.
Jeff
On 2/8/06, Greg Reese <gareese@xxxxxxxxx> wrote:
got it running a little better. It is at least now trying to use the
gateway. Now I am seeing the SSL error 40.
Greg
On 2/8/06, Greg Reese < gareese@xxxxxxxxx> wrote:
nope. it looks like any other ICA connection from the connection
center. oh well. At least I got something on my first attempt. time
for take two.
On 2/8/06, Jeff Pitsch <jepitsch@xxxxxxxxx> wrote:
You should see sessions in the SG management console. Something is
definately wrong with your setup. Your connectioin center should also
say SSL/TLS connection (or something similar).
Jeff Pitsch
On 2/7/06, Greg Reese <gareese@xxxxxxxxx> wrote:
This seems like a dumb question but I figured I would throw it out there
anyway.
I installed a secure gateway server and got it up and running the lan.
I installed WI4 on the same machine. I can connect to the WI site, the
secure gateway performance statistics show some traffic flowing. I see
Connections Total, HTTP/S Bytes to client etc.
But the active sessions are zero while I am running an app and when I
look at the launch.ica file from my client, i see the ip address of the
server my ICA session goes to.
Is that what i am supposed to be seeing? I thought the location of the
metaframe servers was hidden with Secure Gateway.
How can I tell this thing is working right. I would like to know i have
things correct before dropping it in my dmz.
Thanks!
Greg
Other related posts:
