[THIN] Re: Autocreating CE printers
- From: "Ron Oglesby" <roglesby@xxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Fri, 28 Feb 2003 13:25:38 -0600
Go into the CMC and into the printers node.
In there right click on the Printers Icon and select client printers.
Hit the ADD button in the interface for client printers.
Enter the ICA client name of the Windows CE device
Give the printer a logical name=20
Select a server driver to use
And select the port that the printer is physically attached to on that
client.
When any user uses a client with that name it will always connect that
printer to that port.
Ron Oglesby
Senior Technical Architect
=20
RapidApp
Office 312.372.7188
Mobile 312.961.2380
email roglesby@xxxxxxxxxxxx
=20
-----Original Message-----
From: Adam.Baum@xxxxxxxxxxxxxx [mailto:Adam.Baum@xxxxxxxxxxxxxx]=20
Sent: Friday, February 28, 2003 1:18 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Autocreating CE printers
HI All,
I need to figure out how to autocreate printers for CE devices. I've
gone into the Client Printer creation utility of the Metaframe toolbar
and created my printer. I can print to that printer. When I logoff and
reconnect, my printer is listed in the utility, but it won't
autoconnect. How do I set MF to autoconnect the printer? adam
*********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for Citrix
Metaframe and Microsoft Terminal Services! http://www.thinprint.com
**********************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for Citrix
Metaframe and Microsoft Terminal Services!
http://www.thinprint.com
**********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
