Might need to change Ic501, R512 3.9 Ohm & C501 1uf 50V Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ----- Original Message ----- From: "Eric gundersen" <redwitch01@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, June 26, 2002 11:37 AM Subject: [TechAssist] sharp 20 AM 100 Vertical foldover > Hi All, I have a Sharp 20am100 here that has a 3 to 4" blank space at the top of the screen with the same in fold over. Have changed all caps in the vertical deflection circuit with no improvement. checked for 24.7 on pin# 3 and #6 of IC501 and only have 20.5V and 19.4V any help please. Note IC501 seems to go into thermal run away. > > > Eric > > E&G Electronics > Irvington AL > 36544 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/