[TechAssist] sharp 20 AM 100 Vertical foldover
- From: "Eric gundersen" <redwitch01@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 26 Jun 2002 10:37:57 -0500
Hi All, I have a Sharp 20am100 here that has a 3 to 4" blank space at the top
of the screen with the same in fold over. Have changed all caps in the vertical
deflection circuit with no improvement. checked for 24.7 on pin# 3 and #6 of
IC501 and only have 20.5V and 19.4V any help please. Note IC501 seems to go
into thermal run away.
Eric
E&G Electronics
Irvington AL
36544
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
