[TechAssist] Re: rca f36674 ctc197
- From: Wayne Vanaman <Wayne@xxxxxxxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 29 Apr 2005 10:09:57 -0500
When you get up to 76 you use channel up, the first three "channel ups"
are error codes.
Wayne Vanaman
Omega Electronics
6904 W Fairfield Dr
Pensacola, Fl. 32506-3310
Wayne@xxxxxxxxxxxxxxxxxxxxx
WWW.PensacolaTVRepair.Com
850-456-5995 voice
850-458-6369 fax
Gregory Smith wrote:
> I'm actually Gregs tech, Tommy, as he no longer works on sets. No I haven't.
> I did find out that the set comes on in the service mode and has a perfect
> pix and all voltages are correct and so are the clock, data. The training
> manual says to read the error code, codes after getting into the service
> mode. I'm a little unclear as to how to read the error codes since I don't
> have chipper checker. When you press menu, power, vol up, P0 V0 comes up.
> Normally you would then use volume up to advance the V0 to 76 to then get
> into tech adjustable parameters. To read the codes on screen, are the first
> 3 #'s you see on your way to 76 the actual error codes? If so, they're all
> 0's. I've been out of the business for 4 years and missed any CTC195/197
> training and the training manuel is a little unclear to me as to how to read
> error codes on screen. Any info/tips as to what I'm missing here as far as
> reading error codes on screen would be greatly appreciated!! Thanks. Tommy.
> Gregory B. Smith
> G & A Electronic Services
> 2521 N. Laurent
> Victoria, TX 77901
> Ph. 361-575-1998
> gaserv@xxxxxxx
>
> ----- Original Message -----
> From: "danny williams" <wizhd@xxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, April 27, 2005 12:20 PM
> Subject: [TechAssist] Re: rca f36674 ctc197
>
>
>
>>Gregory, did u get this fixed??
>>
>>Dan W. Wizard Electronics
>>----- Original Message -----
>>From: "Gregory Smith" <gaserv@xxxxxxx>
>>To: <techassist@xxxxxxxxxxxxx>
>>Sent: Friday, April 22, 2005 10:50 AM
>>Subject: [TechAssist] rca f36674 ctc197
>>
>>
>>
>>>Set comes on 1 or up to 3 times and shuts off. HV comes up to 24k,
>>>regulator
>>>goes from 156v in standby to 141v, 33v, 31v, 16v, -12v, 5 and 12v
>
> supplies
>
>>>are all on the money. Have checked wintips including replacing flyback
>>>237506 with new one. Any other ideas? TIA. Tommy.
>>>Gregory B. Smith
>>>G & A Electronic Services
>>>2521 N. Laurent
>>>Victoria, TX 77901
>>>Ph. 361-575-1998
>>>gaserv@xxxxxxx
>>>
>>>
>>>
>>>--
>>>No virus found in this outgoing message.
>>>Checked by AVG Anti-Virus.
>>>Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005
>>>
>>
>>--------------------------------------------------------------------------
>
> ---
>
>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>Appliance Repair List:
>>>http://www.tech-assist.org/secure/tip/chatjoin.htm#app
>>>Email Archives: //www.freelists.org/archives/techassist/
>>>
>>
>>
>>--------------------------------------------------------------------------
>
> ---
>
>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>Appliance Repair List:
>
> http://www.tech-assist.org/secure/tip/chatjoin.htm#app
>
>>Email Archives: //www.freelists.org/archives/techassist/
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Anti-Virus.
>>Version: 7.0.308 / Virus Database: 266.10.4 - Release Date: 4/27/2005
>>
>>
>
>
>
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
