Check for leaky HV leads from flyback and to crt 's Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Gregory Smith" <gaserv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, April 20, 2005 1:23 PM Subject: [TechAssist] phillips ptv 910 > Set is popping very intermittenly and blowing H outputs. Had originally > replaced output and set went out again when I wasn't around to see it or > hear it pop. Checked wintips and someone posted Ssb as cause of blowing > output. Tried new Ssb that I had in stock and that's when I was around long > enough to hear it pop. Also tried flyback from another board with same > results. The one time I did happen to see it pop, looked like it came from > the chopper area of the power supply, but not sure. Anyone else have this > type popping/arcing problem? TIA Tommy > Gregory B. Smith > G & A Electronic Services > 2521 N. Laurent > Victoria, TX 77901 > Ph. 361-575-1998 > gaserv@xxxxxxx > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.9.19 - Release Date: 4/20/2005 > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/