Tib, try pushing "action & power" on the front of the set at the same time for about 4 seconds, set will shut down and then restart, supposedly this resets the eprom??? worth a try, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----- Original Message ----- From: <tibstv@xxxxxxxxxxx> To: "tech-assist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, March 02, 2005 9:21 AM Subject: [TechAssist] panasonic ct36d11e chassis # gp342 picture not wide enough > hi > I have this set in shop panasonic ct36d11e with a narrow picture > B+ is ok found nothing wrong with tv other than narrow picture > I suspect this is a EEPROM issue. Should i change EEPROM or just change value of parameter. I don't have schematic and don't know the procedure to get in service mode to change value. > Could anyone be kind enough to lend a helping hand > tib > -- > Tiberio Moreira > 412 Lancaster st > Leominster Ma. 01453 > Master Liscence # 9176 > tibstv@xxxxxxxxxxx > > -------------------------------------------------------------------------- --- > This Email List is viewable to the Public. > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is viewable to the Public. Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/