Don't have a print this model, but cross the vert ic to ecg or what ever. Look up vcc pin and follow the trace to that 1 ohm resister off the flyback. Rick Mitchell Mitch's Electronics Ser.Co. Mitchstv@xxxxxxxxxx 3935 south 20th Lincoln, Nebraska 68502 ----- Original Message ----- From: "andy's tv & vcr service" <atv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 29, 2002 8:38 PM Subject: [TechAssist] panasonic ct-27g11u no vertical > Hello Everyone > Have this panasonic tv with no vert sweep, this tv started out with bad solder connections and the customer's son tried to repair him self. now i have it. i replaced the ic > ers the filters and don't have the b+ to the ic would someone > have the location # and valu of resistor. thank you any help and your time. > > Andy > atv@xxxxxxx > Andy's TV & VCR Service > 724-379-8559 voice/ fax > Donora, Pa. > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/