[TechAssist] Re: magnavox 25y100 no startup
- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 14 Feb 2002 09:22:07 -0500
Did you change C432 yet Big cap behind flyback,
Phillip R Hull
phil245@xxxxxxxxxxxxx
----- Original Message -----
From: "repair1" <repair1@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, February 13, 2002 10:07 PM
Subject: [TechAssist] magnavox 25y100 no startup
>
> I have an old mag 25y100 chassis which is verymuch like y1 and x1 and 6, I
> cant find my print on this set, I replaced y200 saw filter for afc
> drifting,set played fine, unpluggedset, put back on, no start up, the set
> will only start up if you momentarily ground pin8 of eeprom, then hit
power,
> any help or a syscom ckt print would be greatly appreciated.
> charles betzler
> Best Electronics
> repair1@xxxxxxxxxxxxx
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
