Look for a small electrolytic, like 33 or 47 ufd 10 volt, in the primary of the SMPS. When this dries out, the shutdown circuits activate too quickly. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 Fax/Phone 864 232 3889 greentron@xxxxxxx ----- Original Message ----- From: <Royal19960@xxxxxxx> To: <techassist@xxxxxxxxxxxxx>; <gizmo@xxxxxxxxxxxxxxxx> Sent: Tuesday, April 26, 2005 4:17 PM Subject: [TechAssist] help on a funai tvcr9g1 please > Hi all. > Have a symphonic tvcr9g1 in the shop. > Dead > Power supply, on plug in, comes up to approx 10% of correct volts. > +117 goes to +12 ect. > Standby also goes down. > replaced vert chip no dif. > Any Ideas? > Thanks > Roy > > Bonded TV Service > 5158 W Forest Home Ave > Milwaukee, WI 53219 > 414-541-9111 > Web hosting from only 4.17 @ month at BondedHost.com > over 8,000 tubes at Bondedtv.com > > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/