[TechAssist] Re: ctc203ax
- From: "OrpheusComputing.com Repair" <techassist@xxxxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 5 Feb 2002 02:41:37 -0600
FYI, the fix for this was just posted.
================
Fixed: replaced Q14104, random questionable solder on
regulators and HOT section(not area specific, just
general bad solder), new eeprom
=================
-Clint
God Bless Us All
Clint Hamilton, Owner
http://OrpheusComputing.com
http://ComputerHardware-ConsumerElectronics.com
sales@xxxxxxxxxxxxxxxxxxxx
Fax: 209-882-9602
TechAssist Administration
http://tech-assist.org
techassist@xxxxxxxxxxxxx
4orpheus@xxxxxxxxxxxxx (alternates)
orpheuscomputing@xxxxxxxxx
(PLEASE include our previous correspondence
if replying to this email!!)
----- Original Message -----
From: "Ralph Dorsey" <Merlin-Wizard@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, February 05, 2002 2:39 AM
Subject: [TechAssist] Re: ctc203ax
change the flyback.
Warren Campbell wrote:
>DITO I Have the same problem and have worked on the set for
about 4 weeks /
>interested in a fix
>Warren Campbell
>
>Rs Tek Inc wrote:
>
>>CTC203AX , RCA
>>
>>No Turn On, Have standby voltages and have clock and data
siganls to eeprom. Changed eeprom but still no powerup. The
power supply chirps when I plug it in. The tuner grounds
looked ok, I'm kind of lost on these new CTC chassis. Any
Ideas?
>>
>>Frank
>>Rs-Tek Inc
>>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
