yeah i was late.....can't answer my e-mail every day and i get about 200 from here and from other sites also OrpheusComputing.com Repair wrote: >FYI, the fix for this was just posted. >================ >Fixed: replaced Q14104, random questionable solder on >regulators and HOT section(not area specific, just >general bad solder), new eeprom >================= > >-Clint > >God Bless Us All >Clint Hamilton, Owner >http://OrpheusComputing.com >http://ComputerHardware-ConsumerElectronics.com >sales@xxxxxxxxxxxxxxxxxxxx >Fax: 209-882-9602 >TechAssist Administration >http://tech-assist.org >techassist@xxxxxxxxxxxxx >4orpheus@xxxxxxxxxxxxx (alternates) >orpheuscomputing@xxxxxxxxx >(PLEASE include our previous correspondence >if replying to this email!!) > > >----- Original Message ----- >From: "Ralph Dorsey" <Merlin-Wizard@xxxxxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Tuesday, February 05, 2002 2:39 AM >Subject: [TechAssist] Re: ctc203ax > > >change the flyback. > >Warren Campbell wrote: > >>DITO I Have the same problem and have worked on the set for >> >about 4 weeks / > >>interested in a fix >>Warren Campbell >> >>Rs Tek Inc wrote: >> >>>CTC203AX , RCA >>> >>>No Turn On, Have standby voltages and have clock and data >>> >siganls to eeprom. Changed eeprom but still no powerup. The >power supply chirps when I plug it in. The tuner grounds >looked ok, I'm kind of lost on these new CTC chassis. Any >Ideas? > >>>Frank >>>Rs-Tek Inc >>> > > >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.