Avery Boyd 4666B S. Mingo Tulsa OK 74146 Phone 918-665-2400 ----- Original Message ----- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, March 02, 2005 7:58 AM Subject: [TechAssist] Re: Zenith model r49w36 not wide enough Avery Boyd 4666B S. Mingo Tulsa OK 74146 Phone 918-665-2400 ----- Original Message ----- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 01, 2005 12:18 PM Subject: [TechAssist] Zenith model r49w36 not wide enough I am working on a model R49w36 Zenith/Samsung. It was dead when brought to the shop. Found several parts bad in the horzi power supply, also the vert IC was bad. All this was caused by a arcing red anode lead. Got the set on but don't have enough width on the sides. Anyone have information on this set, what the voltage should be to the horzi. I have 113.9v and 119.5 coming out of the power supply. Thanks in advance. Avery. Avery Boyd 4666B S. Mingo Tulsa OK 74146 Phone 918-665-2400 ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ---------------------------------------------------------------------------- - This Email List is viewable to the Public. Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is viewable to the Public. Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/