Check the 120k ohm resistors on the 3 crt boards it is next to the output transistor you will have to unsolder one end to measure properly Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc Dallas, TX ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 18, 2003 10:14 AM Subject: [TechAssist] Zenith Z56Z83RB PTV Weird problem > This set looks like a Direct view Zenith that has a short in the CRT. You > know where when you turn up the brightness it goes out of focus in a line > across the screen. On the bands of writing on the stock channels and on the > advertisement channels. Did anyone ever see a projo do this? Replaced 9-1674 > Module and Convergence IC's to get it running, now I have this. Thanks for > any help. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/